• Where to Next?

Suzuki Jimny, SJ40, Lada Niva, Ford F100 5 Stud Wheel Spacer

WSPACERJIMNY
Rating 
Wheel Spacer for Jimny, SJ40, Lada Niva, Ford F100. 5 Stud Spacer with 139.7 mm PCD. 30mm thick.
Price is per one spacer
R700.00
Tax included
Quantity
In stock with us

Description

5 Stud Wheel spacers used for Suzuki Jimny, Suzuki Samurai (SJ40), Lada Vida, Ford F100 and others

You can use these wheel spacers to push out the wheel a bit. Some people do it for the looks and others use wheel spacers because they fit new rims and the new rims catches the calipers.

NOTE: Price is per spacer!

The wheels spacer bolts onto the vehicle on the existing studs with the nuts supplied. Your wheel then bolts onto the wheel spacer using the studs on the wheel spacer and your original nuts.

  • Wheel spacer material T6-6160 ALUMINUM
  • Stud - 12x1.25mm - high tensile 12.9 grade
  • Nuts - 40CrMo high tensile steel
  • 31.75 mm thick (1.25")
  • 139.7 mm PCD
  • Centre bore 108.7mm

NOTE: On the Ford F100 the stud thread pitch differs from that of the spacers. You will use the original Ford nuts to attach the spacer to the vehicle and use the supplied nuts to attach the wheels to the spacer.

Notes: Please read full fitment instructions here:
http://www.4x4direct.co.za/blog/fitment-instructions-for-wheel-spacers/

Make sure the surface on the vehicle hub is clean and free from any debris before fitment.
The same applies to the back of the wheel spacer which should be clean.
Tighten all nuts by hand first, then torque in cross over sequence to 30 Nm. Then Torque to 100Nm.
When you have them fitted at a tyre fitment centre, keep an eye on the procedures because they normally tighten it with impact wrench. DO NOT allow them to use an impact wrench and make sure they tighten them in cross over sequence.
Check the wheel spacer nuts after the first 500 km to make sure they are tight. Thereafter check every 5000km.

 

The picture below shows how to fit the wheel spacer to your vehicle

Wheel spacer

Made in PRC to our specifications

By Piet Petoors (Google +)

Product Details
Badger
WSPACERJIMNY
84 Items
Reviews

No customer reviews for the moment.

Write your review

Suzuki Jimny, SJ40, Lada Niva, Ford F100 5 Stud Wheel Spacer

Suzuki Jimny, SJ40, Lada Niva, Ford F100 5 Stud Wheel Spacer

Wheel Spacer for Jimny, SJ40, Lada Niva, Ford F100. 5 Stud Spacer with 139.7 mm PCD. 30mm thick.
Price is per one spacer
Write your review
15 other products in the same category:

Reference: STUD12X1-5-REVO

Brand: Badger

Toyota Hilux REVO Wheel Hub extended stud

Review(s): 0

Toyota Hilux REVO Wheel Hub extended stud Extended Studs for Toyota Hilux Revo Longer than OME.Designed if you want to fit wheel spacers

Price R50.00
More
In stock with us

Reference: STUD12X1.25

Wheel Spacer Stud and Nut 12x1.25mm

Review(s): 0

This extra stud fits the 6 Stud Nissan spacers Stud - M12x1.25mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel

Price R55.00
More
In stock with us

Reference: WSPACER6NAVARA

Brand: Badger

Nissan Navara Wheel Spacer

Review(s): 0

6 Stud Wheel Spacer Nissan Navara PCD 114.3. 30mm thick Price per one spacer.

Price R700.00
More
In stock with us

Reference: WSPACER6STUD

Brand: Badger

Hilux,Triton, Ford, Isuzu 6 Stud Wheel Spacer

Review(s): 0

Please note:It does not fit on Hilux Revo Models(2016-onwards).The Revo's standard studs are too short 6 Stud Wheel Spacer for Hilux, Triton, Ford, Isuzu. 6 stud, PCD139.7mm and centre bore is 108mm 30mm thick

Price R700.00
More
In stock with us

Follow us on Facebook