Reference: OSLRDPFLC
Brand: Badger
Defender PUMA Snorkel
Air intake snorkel for Land Rover Defender Puma Lifetime Warranty for cracking and fading.
You can use these wheel spacers to push out the wheel a bit. Some people do it for the looks and others use it because they fit new rims and the new rims catches the calipers.
The wheels spacer bolts onto the vehicle on the existing studs with the nuts supplied. Your wheel then bolts onto the wheel spacer using the studs on the wheel spacer and your original nuts.
Have a look at http://www.wheel-size.com/size/ to see what size spacer your vehicle use.
NOTE: Price PER WHEEL SPACER
NOTE: If you use it on steel rims the studs are too long for the chrome nuts and you have to trim the studs a little bit. It is however no problem with mags.
Notes: Please read full fitment instructions here:
http://www.4x4direct.co.za/blog/fitment-instructions-for-wheel-spacers/
Make sure the surface on the vehicle hub is clean and free from any debris before fitment.
The same applies to the back of the wheel spacer which should be clean.
Tighten all nuts by hand first, then torque in cross over sequence to 30 Nm. Then Torque to 100Nm.
When you have them fitted at a tyre fitment centre, keep an eye on the procedures because they normally tighten it with impact wrench. DO NOT allow them to use an impact wrench and make sure they tighten them in cross over sequence.
Check the wheel spacer nuts after the first 500 km to make sure they are tight. Thereafter check every 5000km.
The picture below shows how to fit the wheel spacer to your vehicle
Made in PRC to our specifications
By Piet Petoors (Google +)
No customer reviews for the moment.
Reference: OSLRDPFLC
Brand: Badger
Air intake snorkel for Land Rover Defender Puma Lifetime Warranty for cracking and fading.
Reference: SLRDE5A
Brand: Badger
Land Rover Defender TD5 Right Hand Fit Snorkel Most commonly used for all the old model Defenders. fits both petrol and diesel models. Lifetime Warranty for cracking and fading.
Reference: GOBIBASH-DEFENDER
Brand: Gobi-X
Land Rover Defender Aluminium Steering Guard 8mm Automotive Grade Aluminum Alloy Up to 55% Lighter than an equivalent steel design
Reference: WSPACERJEEP114
Brand: Badger
Wheel Spacer for Jeep 5 stud PCD 114.3 . 30mm thick Price is per one wheel spacer
Reference: WSPACER6STUD
Brand: Badger
Please note:It does not fit on Hilux Revo Models(2016-onwards) The Revo's standard studs are too short 6 Stud Wheel Spacer for Hilux, Triton, Ford, Isuzu. 6 stud PCD139.7mm and centre bore is 108mm 30mm thick
Reference: WSPACER6NISSAN
Brand: Badger
6 Stud Wheel Spacer - Nissan Fits Hardbody and Patrol(Does not fit Y62 Models) PCD 139.7, 30mm thick. Price per unit.
Reference: WSPACERMAHINDRA-50mm
Brand: Badger
50mm Wheel spacer to fit Mahindra Thar and Bolero PCD = 5/160 Price is per one spacer
Reference: STUD1-2-20UNF
Brand: Badger
This extra stud will fit the Jeep wheel spacers. Stud - 1/2" x 20UNF - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACER6NAVARA
Brand: Badger
6 Stud Wheel Spacer Nissan Navara PCD 114.3. 30mm thick Price per one spacer.
Reference: WSPACERGELANDEWAGEN
Brand: Badger
Gelandewagen Wheel Spacers 5 stud 130 PCD With Spigot ring Price is per one spacer
Reference: WSPACERDISCO3-4
Brand: Badger
5 Stud Wheel Spacer for Land Rover Discovery 3 and 4. With Spigot Ring 120 mm PCD Price is per one spacer
Reference: STUD12X1.25
This extra stud fits the 6 Stud Nissan spacers Stud - M12x1.25mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACERJIMNY
Brand: Badger
Wheel Spacer for Jimny, SJ40, Lada Niva, Ford F100. 5 Stud Spacer with 139.7 mm PCD. 30mm thick. Price is per one spacer
Reference: STUD12X1-5
This extra stud fits the 6 stud wheel spacer used for Hilux, Ford, Mazda, Mitsibushi and others. Stud - M12x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel
Reference: WSPACERJEEP127
Brand: Badger
Jeep Wrangle JK 2007-2018 5 Stud Wheel spacer with 127mm PCD 30mm thick, with spigot ring Price per one.
Reference: WSPACER5STUD
Brand: Badger
5 Stud Wheel Spacer for Land Cruiser Pick Up PCD 150mm, 45mm thick. Price is per one spacer
Reference: STUD12X1-5-REVO
Brand: Badger
Toyota Hilux REVO Wheel Hub extended stud Extended Studs for Toyota Hilux Revo Longer than OME.Designed if you want to fit wheel spacers
Reference: STUD14X1-5
These extra studs will fit the 5 stud Land Cruiser wheel spacer - M14 x 1.5 Stud - M14x1.5mm - high tensile 12.9 grade Nuts - 40CrMo high tensile steel