Reference: LUG-10H10
Brand: Badger
The 6mm² Non-Insulated Crimp Ferrule is designed to provide a neat and secure termination for stranded electrical cables.
When connecting stranded wire to screw or clamp terminals, individual strands can spread or become damaged during tightening. A correctly crimped ferrule holds the strands together, creating a compact cable end that can be inserted into a compatible terminal.
This tinned, non-insulated ferrule is suitable for 6mm² stranded electrical cables and is a useful component for automotive wiring, 4x4 electrical systems, caravan installations and general electrical work.
6mm² Cable Compatibility: Designed for stranded electrical cable with a nominal conductor cross-section of 6mm².
Non-Insulated Design: Metal ferrule without a plastic insulation collar.
Tinned Finish: Provides a protective surface finish on the ferrule.
Secure Wire Termination: Keeps individual wire strands together when correctly crimped.
Compact Dimensions: Measures 5.1mm outside diameter, 3.4mm inside diameter and 15mm long.
Crimp Installation: Designed for use with a suitable ferrule crimping tool.
Brand: Badger
Product Type: Non-Insulated Crimp Ferrule
Cable Size: 6mm²
Outside Diameter (OD): 5.1mm
Inside Diameter (ID): 3.4mm
Length: 15mm
Finish: Tinned
Insulation: None
Connection Method: Crimping
4x4 Direct Reference: FERRULE6
4x4 and automotive accessory wiring
Auxiliary battery and DC distribution systems
Caravan and trailer electrical installations
Solar and inverter wiring
Electrical control panels
Terminal blocks and distribution equipment
General electrical repairs and maintenance
Strip the cable insulation to suit the ferrule length and terminal requirements.
Insert the exposed wire strands fully into the ferrule, ensuring no strands remain outside the sleeve.
Use a suitable ferrule crimping tool and the correct die size to compress the ferrule securely onto the cable.
Check that the ferrule is firmly attached and that no loose strands remain.
Insert the crimped ferrule into a compatible terminal and tighten according to the terminal manufacturer's specifications.
This is a non-insulated ferrule and does not provide electrical insulation or protection against accidental contact with live conductors.
Check that the receiving terminal can accommodate the ferrule's 5.1mm outside diameter. Not all terminals designed for 6mm² bare cable will necessarily accept the same cable once fitted with a ferrule.
Use a proper ferrule crimping tool rather than ordinary pliers to achieve a consistent crimp.
The 6mm² Non-Insulated Crimp Ferrule is a practical component for producing tidy, secure stranded-wire terminations in automotive, 4x4 and general electrical installations.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: LUG-10H10
Brand: Badger
Reference: FERRULE16
Brand: Badger
Reference: BUSBAR-FLUSH
Brand: Badger
Reference: FERRULE10
Brand: Badger
Reference: TERMPIN-RED
Brand: Badger
Reference: BUSBAR4-FLUSH-BL
Brand: Badger
Reference: BOOTLACE-GREY-50PC
Brand: Badger
Reference: BUSBAR4-FLUSH-RED
Brand: Badger
Reference: BOOTLACE-YELLOW-50PC
Brand: Badger
Reference: LUG-16H6
Brand: Badger
Reference: BUSBAR6xM6-FLUSH-RED
Brand: Badger
Reference: TERMF9.4MM-ALTERNATOR
Brand: Badger
Reference: BOOTLACE-BLACK-50PC
Brand: Badger
Reference: TERMPIN-16-13
Brand: Badger
Reference: TERMINALRING1-4
Brand: Badger
Reference: FERRULE4
Brand: Badger
Reference: CRIMPINGTOOL-HEX
Brand: Iwiss
Reference: ELECWL-6
Brand: Badger
Reference: FERRULE2.5
Brand: Badger
Reference: FERRULE4
Brand: Badger
check_circle
check_circle